Deep Clean
Overview
For cleaning stone, decking, tiles and PVC frames
- Ready-to use formula-no mixing or diluting required
- Fast and effective
- Contains no acid-safe to use on surfaces
- Easy to use
EASYCare Deep Clean is a powerful and effective, non-acidic degreasing cleaner. Deep Clean will remove stubborn greasy stains and soiling. Heavy duty cleaning of stone, decking, tiles, and cementitious grout. Ideal for bringing white PVC conservatories and window frames back to a new look. The unique formulation continues to work for weeks after use so the surface can stay cleaner for longer. Deep Clean is also suitable for the removal of over-applied water-based sealers
Deep Clean
Installation Guide
Step 1. Shake
Shake well before each use
Step 2. Dilute
Dilution ratio depends on staining level
Can be used neat on heavy contamination or can be diluted by adding 1 part product with up to 10 parts water depending on the staining to be removed.
Step 3. Apply
Using a spray or brush apply the Deep Clean liberally and allow to act for 1-2 minutes for lightly soiled surfaces, or 5-10 minutes for heavily soiled surfaces.
Step 4. Repeat if required
For removing deep penetrating lubricating oil and stains, it may be necessary to apply the product twice allowing 10 minutes between applications.
Step 5. Rinse
Agitate with a firm bristle brush and rinse down thoroughly with clean water. For best results on drives, patios and block paving use a pressure washer when rinsing.
Use as a Sealer
Deep Clean can be used to remove over-applications of water-based sealers such as EASYSeal SSP, Ultimate, Sandstone and Slate & Limestone. This will only remove surface product and not that which has been absorbed. Using a spray or brush apply the Deep Clean liberally and allow to act for 15-20 minutes. Scrub vigorously with a firm bristle brush and leave a further 10 minutes. Rinse down thoroughly with clean water. Repeat the application as required.