EASYClickBase
Overview
A revolutionary new way to create patios, paths and driveways
- A synthetic base alternative to traditional methods
- It reduces the time, labor and costs of an installation
- A lightweight, simple interlocking system; easy to transport and ideal for areas with restricted access
- Manufactured from 100% recycled ABS plastic. Any unused off cuts can then be fully recycled.
- Ideal for all types of segmental paving
Videos
Demonstration
For Driveways
For Patios
Installation Guide
Step 1. Remove
Remove just enough soil to achieve the desired height for the finished surface.
Top Tip! Only remove what is necessary.
Step 2. Grade
Grade the soil to set as level as possible.
Top Tip! Remember this step will save time and minimise aggregate.
Step 3. Level
Apply a thin layer of bedding aggregate to provide a level and stable surface.
Top Tip! Remember to allow for falls.
Step 4. Lay
Lay the EASYClickBase in a brick bond pattern.
Top Tip! Make sure the connection points are clean, free of debris, smooth and flush. Remember to listen for the “click”.
Step 5. Apply
Lay the desired slabs, blocks, bricks or paving where required.
Top Tip! A 6mm bead of Adhesive on the perimeter of the tile is ideal for porcelain and other suitable paving slabs.
Step 6. Finish
Fill the joints with the appropriate Azpects jointing product.
Top Tip! This will provide extra strength and durability, as well as a smoother finish.