EASYPrime
Overview
A high bond primer for use on natural stone and porcelain paving
- Delivers a strong, long-lasting bond
- Easy to apply
- Suitable for interior and exterior use
- Easy to mix, use and clean away
- Can be mixed in the tub
- Contains 3 11 lbs. bags for minimum waste
- 33 lbs. tub
The primer for cementitious slurry, EASYPrime, is enhanced using polymers. This high-strength bonding solution is simple to apply when laying natural stone and porcelain paving. It ensures that the aggregated mortar in the bedding layer is fully and permanently in touch with it. Applications in public, business, and residential settings are appropriate.
The depth of the coated film, as well as the porosity and texture of the rigidly bonded sub-base, all affect coverage. A single 11-pound packet of EASYPrime, as a general rule of thumb, should cover at least 86 square feet.
Videos
How to use EASYPrime
Installation Guide
Before you start - The supporting sub-base should be stable and free from the risk of movement or heave. Allow for adequate falls and drainage from the finished surface. Extra precautions may be necessary to ensure the area is prepared properly. Certain types of tile and stone paving may be unduly porous and hence prone to surface discolouration. Natural stone and porous, un-glazed tiles are particularly at risk from permanent discolouration. To avoid this always carry out a small trial test, applying freshly mixed EASYPrime to a spare tile to determine whether staining is likely.
Step 1. Mix
Step 2. Apply
Top Tip! Leave an inch-wide gap around the edge for handling.
Step 3. Lay
Step 4. Store Unused Product
Keep the product sealed until use in dry, well ventilated conditions at ambient temperatures and away from all sources of damp. When kept in its original sealed state in a permanently dry environment, this product will retain a shelf life of up to 12 months from date of manufacture.