Salt Remover
Overview
Remove salt stains from brickwork
- Organic formula dissolves and neutralises salts for long-lasting results
- Prevents salt deposits returning
- Simply apply, leave for 2 hours, then wash away
- 3 litre ready to use
Salt Remover is a non-acid chemical with the added advantage of neutralising the salts on and within the substrate, reducing the possibility of a re-occurrence of the white deposits.
What is efflorescence?
The term is generally applied to any white deposit on paving, brickwork and cement. However, the white deposits can be one of many salt types, and different products are required to treat them. If the deposit is fluffy and can be brushed or washed off, it is likely to be sodium based. The correct product for this is Salt Remover. However, if the deposit on the surface is hard and doesn’t dissolve with water or will not easily brush off, it is likely to be calcium-based. For this problem, use Mortar Stain & Calcium Remover. This removes the white deposits but cannot prevent the possibility of re-occurrence.
Salt Remover
Installation Guide
Step 1. Shake
Shake well before use.
Step 2. Apply
Saturate the affected area using a garden sprayer, watering can or brush.
Step 3. Reapply
Leave to work for at least 1 hour, then reapply.
Step 4. Wait
Leave for 24 hours to allow deep penetration and neutralisation of the salts.
Step 5. Finish
After 24 hours, wash the surface using a hose, a stiff brush, or a power washer.